Page 1 of 4
Galtech Industries AU
Posted: December 7th, 2014, 7:13 pm
by Galrodes
Galtech Industries is an active multinational firm in many sectors : aerospace, military, scientific, naval, electronics, medical . . .
Very active in research, she develops new concepts while constantly improving her discoveries. She brings innovative solutions in met problems of every domain.
Re: Galtech Industries AU
Posted: December 7th, 2014, 7:30 pm
by Galrodes
The HATT (Heavy armored tactical truck)
Re: Galtech Industries AU
Posted: December 7th, 2014, 7:40 pm
by Galrodes
The Aircraft cargo loader
The Aircraft Cargo Loader is a rapidly deployable, high-reach mechanized aircraft loader that can transport and lift up to 25,000 pounds of cargo and load it onto military and civilian aircraft.
The loader built by Galtech industries is highly mobile and can transport a full load of cargo at a maximum speed of 17 mph. Its versatile deck elevates from 39 inches to 18 feet, 4 inches high and employs a powered conveyer system to move the cargo on or off the aircraft. The deck has pitch, roll, and side-to-side adjustment for quick and efficient interface with all military and commercial cargo aircraft, including the B-747, L-1011, and DC-10. The loader has a 100-inch wheel-to-wheel width for loading/unloading and transport operations. The loader is easily configured from operational to transport mode, which reduces the width from 170 inches to 109 inches. The chassis is also hydraulically adjustable to facilitate driving the loader on or off of C-130, C-141, C-5, or C-17 aircraft when it is transported.
Re: Galtech Industries AU
Posted: December 8th, 2014, 6:50 pm
by eswube
Nice work. Looking forward to see more.
Re: Galtech Industries AU
Posted: January 2nd, 2016, 9:39 pm
by Galrodes
Galtech ind. Snowmobile Model SN101
Re: Galtech Industries AU
Posted: January 3rd, 2016, 2:21 am
by adenandy
Some REALLY well drawn stuff there Galrodes
Jolly well done.... What an entrance to Ship Bucket.... Welcome aboard matey and, I can't WAIT to see more please
Re: Galtech Industries AU
Posted: January 3rd, 2016, 8:58 am
by Gollevainen
Hi, and welcome. These are nice and intresting drawings, but I have to ask you, are your work going to be predominatly in FD scale? If so, then I can move this thread to the proper subforum, since this section is mostly ment for Shipbucket scale AU projects.
Re: Galtech Industries AU
Posted: January 3rd, 2016, 9:54 am
by Galrodes
Hi, thanks.
Yes i work principally with the FD Scale. How can i move this thread in the appropriate subforum?
_________________
Coming -> the SPV (Snow Patrol Vehicle)
Re: Galtech Industries AU
Posted: January 3rd, 2016, 10:01 am
by Gollevainen
Allrigth. You cant move it yourself, but I can do it.
Re: Galtech Industries AU
Posted: January 3rd, 2016, 1:38 pm
by Galrodes
Thank for the moving