Surface Action Groups Long Beach

Post any drawings you have made that do not pertain to an Alternate Universe scenario and are not a never-built design.

Moderator: Community Manager

Message
Author
SINJOORTJE
Posts: 66
Joined: July 22nd, 2011, 12:13 am

Surface Action Groups Long Beach

#1 Post by SINJOORTJE »

Ok so here is a pre-aegis, pre-VLS long beach that I modified of the original.
The story behind. It is that Reagan brought the long beach I to refit so that it could be in his surface action groups. It is armed with;
1 8 inch MK.71 gun
3 Mk. 26 SM-1 launchers for both SM-1 and ASROC
6 Tomahawk ABLs
2 Harpoon launchers
1 Sea Sparrow Mk. 29 launcher
3 Phalanx Mounts
Radome
Posts: 1145
Joined: April 15th, 2011, 10:57 pm
Location: Jerusalem, Israel

Re: Surface Action Groups Long Beach

#2 Post by Radome »

2 questions.
Why all the unnesessery space below the bridge?
And what is that square under the hull? I don't think it will go very fast with a big square under it's hull :)
- - -> My Worklist! <- - -
User avatar
Thiel
Posts: 5376
Joined: July 27th, 2010, 3:02 am
Location: Aalborg, Denmark

Re: Surface Action Groups Long Beach

#3 Post by Thiel »

That's the radar and the sonar respectively
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.
Rodondo
Posts: 2493
Joined: May 15th, 2011, 5:10 am
Location: NE Tasmania

Re: Surface Action Groups Long Beach

#4 Post by Rodondo »

Also why can't this be merged with your other Long beach thing?
Work list(Current)
Miscellaneous|Victorian Colonial Navy|Murray Riverboats|Colony of Victoria AU|Project Sail-fixing SB's sail shortage
How to mentally pronounce my usernameRow-(as in a boat)Don-(as in the short form of Donald)Dough-(bread)
"Loitering on the High Seas" (Named after the good ship Rodondo)

There's no such thing as "nothing left to draw" If you can down 10 pints and draw, you're doing alright by my standards
User avatar
Obsydian Shade
Posts: 797
Joined: August 13th, 2010, 5:44 am
Contact:

Re: Surface Action Groups Long Beach

#5 Post by Obsydian Shade »

Needs a 3D air search set... Try A/N SPS-48.
We can't stop here--this is Bat country!

If it's close enough to cast a shadow, I think the flying house wins initiative.

Bronies are like the Forsworn. Everyone agrees that they are a problem but nobody wants to expend the energy rooting them out.

"That is a very graphic analogy which aids understanding wonderfully while being, strictly speaking, wrong in every possible way."
erik_t
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US

Re: Surface Action Groups Long Beach

#6 Post by erik_t »

You can't just stick Mk 26 wherever you feel like. Same for the 8/55. Both require massive open spaces directly beneath the mount, spaces which are not present in any of the locations currently required (the only exception being the #2 Mk 26).

Such amount of firepower with only three directors and 2-D air search radar... not that sensible.

God knows why NSSM is present.

That amount of ABL would not be good from a stability point of view.

Harpoons are... hovering. But they can be launched from Mk 26 anyway.
SINJOORTJE
Posts: 66
Joined: July 22nd, 2011, 12:13 am

Re: Surface Action Groups Long Beach

#7 Post by SINJOORTJE »

I cannot merge this with my other LB page because this is not a real design. I did not know those facts about the Mk. 26. Could I put it into the present 8 inch position and the 8 inch into the ABL area and replace the harpoons with 2 ABLs?
erik_t
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US

Re: Surface Action Groups Long Beach

#8 Post by erik_t »

No. As I just said, both 8/55 and Mk 26 require large open spaces below decks. Trading one non-existent open space for another non-existent open space is not really an improvement.

8/55 right above the engine room is, if anything, even less possible.
SINJOORTJE
Posts: 66
Joined: July 22nd, 2011, 12:13 am

Re: Surface Action Groups Long Beach

#9 Post by SINJOORTJE »

Where do you recommend I put the 8 inch. And there was a terrier missile where I proposed to put the other Mk. 26. Wouldn't it still work? For both the MK. 26 and the 8 inch?
Last edited by SINJOORTJE on August 27th, 2011, 4:33 am, edited 1 time in total.
erik_t
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US

Re: Surface Action Groups Long Beach

#10 Post by erik_t »

You won't put an 8/55 anywhere, because you don't tack major caliber weapons onto a missile ship in a 'refit'. You won't have any Mk 26 except the one(s) directly on top of the old Terrier magazine(s), because anything else would be more expensive than building a new ship.
Post Reply