Page 64 of 167
Re: Real Gunbucket For Real Designs
Posted: August 17th, 2015, 1:52 am
by Brian2170
Colosseum wrote:Oh right... I actually changed that years ago on a local copy after finding the excellent IMFDB article on the M16 rifle series (
http://www.imfdb.org/wiki/M16_rifle_series) but never got around to posting it.
One correction I might add to your M16A1 is to thin the barrel out a bit - it's still using the same heavy barrel from the A2.
Do me a favor and maybe put "A2 receiver modified by Brian" or whatever on the parts sheets.
I think I'll add both the A1 receiver and handguard to the M16 parts sheets when I have the time.
Plus, I think the words 'Real A2 Receiver' will do better.
Re: Real Gunbucket For Real Designs
Posted: August 19th, 2015, 7:55 pm
by Skyder2598
Hi all,
because I'm in gundrawing-mode I decided to draw the
FN FNP-45
EDIT:to avoid double post
HK GLM
Next to come is the Milkor MGL...
Did we have a Remington870...?
Hope you ike it...
Re: Real Gunbucket For Real Designs
Posted: August 20th, 2015, 9:10 pm
by eswube
Very nice!
Re: Real Gunbucket For Real Designs
Posted: August 20th, 2015, 9:16 pm
by APDAF
Nice, though FN is from belgium.
Re: Real Gunbucket For Real Designs
Posted: August 20th, 2015, 11:24 pm
by Blackbuck
FNH USA isn't, thet are however the people that did the FNX / FNP 45 for the JCP program.
Re: Real Gunbucket For Real Designs
Posted: September 3rd, 2015, 2:53 pm
by Judah14
Updated my Gunbucket parts sheet, fixing the shading of some of the parts and adding the FAB Defense TAL-4 vertical foregrip:
EDIT: Added FAB Defense RBS and FBS rear/front iron sights and Meprolight 4X magnified scope
Re: Real Gunbucket For Real Designs
Posted: September 15th, 2015, 9:20 am
by Judah14
Colo's M4A1 carbine has some errors in it, such as the shape of the front receiver pivot pin and the gas tube, so in this drawing I fixed them, along with adding better shading, FAB Defense accessories and the Meprolight M21 reflex sight:
Re: Real Gunbucket For Real Designs
Posted: September 15th, 2015, 6:48 pm
by Colosseum
Go easy on the original Gunbucket drawings.
They were made in 2008 and set the standard that all you clowns have made so many wonderful drawings with.
Also, the original M4 was drawn using an airsoft gun as a model (along with photos) so any errors are mine and mine alone.
Re: Real Gunbucket For Real Designs
Posted: October 11th, 2015, 12:59 pm
by Judah14
USA, Lewis Machine & Tool M203 (9" barrel):
Re: Real Gunbucket For Real Designs
Posted: October 22nd, 2015, 7:22 pm
by Skyder2598
@Judah14: Nice work
I only would higlight the grip part due to it's round shape
@Blackbuck/ APDAF: fixed the origin
Heckler & Koch HK417
Hope you like them