Page 5 of 36
Re: belowdeck parts
Posted: April 5th, 2012, 2:06 pm
by heuhen
Re: belowdeck parts
Posted: April 8th, 2012, 8:22 pm
by Andorianus
Thanks for sharing this; now I can at least ballpark the general below-deck space needed for Goalkeeper, which has been a problem on my previous drawings. As with most of the guns posted ITT the space needed is much less than I had expected.
Mind if I draw the goalkeeper's below, based on the images you sent?
Re: belowdeck parts
Posted: April 8th, 2012, 8:23 pm
by acelanceloet
if you look at the first post, you can see the goalkeeper is already done
EDIT: note that the 2 parts that are not directly connected to the mount itself are the ammo drum and the control cabinets. of course this system is not complete, (see heuhens image for that) but the systems which are close by the mount are included. while I normally don't add the cabinets (as somebody should research stuff like that themself, and I don't know a lot of bucketeers who check internal space that exact) but as the one who drew this for me included them, I thought I'd let them in (considering that similar parts for the mk 26 are just included in the system itself, it certainly isn't wrong to include them to guns as well)
Re: belowdeck parts
Posted: April 9th, 2012, 9:40 am
by Andorianus
if you look at the first post, you can see the goalkeeper is already done
Must have missed the update. Thanks!
Re: belowdeck parts
Posted: May 12th, 2012, 10:44 pm
by acelanceloet
added:
http://dl.dropbox.com/u/63276563/mk%2041%20base%205.png
top view is coming, as mitch's one was flawed (or at least, does not fit the sizes specified here) but I open these for comment already. when I have the top view an more worked out layout is coming too, but wanted this one out after the hours of drawing it took me
please comment, as usual
btw, anybody got refs on the belowdeck parts of the shorter mk 41 variants?
Re: belowdeck parts
Posted: May 20th, 2012, 10:49 am
by acelanceloet
added the RR spey gas turbine
EDIT: and oto melara 127 compact and lightweight. the entire lightweight is redrawn as well, as it was way too big.... slipped through on my update of all the guns. the compact was slightly too big as well, but within boundaries.... (2 pxls too high) so I decided to keep her like that.
Re: belowdeck parts
Posted: May 20th, 2012, 1:01 pm
by SHIPDUDE
One of the most important parts of the ship, almost always overlooked!
Re: belowdeck parts
Posted: May 20th, 2012, 9:08 pm
by heuhen
And what is it!
Re: belowdeck parts
Posted: May 20th, 2012, 9:28 pm
by Thiel
A head.
Re: belowdeck parts
Posted: May 20th, 2012, 9:50 pm
by heuhen
