Page 31 of 50

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 4:38 pm
by Cplnew83
WhyMe wrote:
Cplnew83 wrote:@ Gollevainen : Can I use your An-2 to make the An-4 (An-2V) ?
I asked first and I'm already drawing it :P
Damn ! :D

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 4:40 pm
by Gollevainen
While I am aware, that arguing with Site Admin is a very poor policy choice, I'll dare to keep my opinion.
heh, Im not going to ban those who disagree with me, and If I appear stubbourn, its becouse I am stubbourn ;)

The plans I used where rahter obscure by the terms of the landing gear (it shows it pitch black)
Image
As for Il-14 wheel... Yea, I know it is assymetrich, but like I tried to say, it was what I could do... I didn't want to expand it into direction or other since it would have broken the leveling of the drawing so that the other set of landing gear would be one pixel higher than the other. The Inner part of the wheel is just as assymetrich as the actuall wheel (well it naturally multiblies it), I dont think it looks anyway better if the metal capsule is egg shaped, while the innermost nub is circle. they all would need to be circle.

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 4:49 pm
by WhyMe
Gollevainen wrote:The plans I used where rahter obscure by the terms of the landing gear (it shows it pitch black)
Your plan shows the left-side landing gear from inside, because the right-side wheels are cut off along with wings. So eswube is correct on this one.
This is An-2M but the landing gear should be the same.
Image
Also, propeller blades would make a great addition ;)

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 4:58 pm
by eswube
Gollevainen :)
That's precisely what I was talking about. Your reference drawing shows the aircraft like if it was slashed with a razor along the right side of the fuselage - it has no right side horizontal stabilizer, no right wings (upper and lower) and no right wheel.

In a view from above the plane form Your reference drawing would look like this:

Image

As for Il-14, on my drawing wheels of both front and main landing gear are on the same level. And by the way, I believe that front leg was just slightly longer - just several centimeters (perhaps 10), though I wouldn't bet much on it.

P.S. WhyMe - You were fast. ;)

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 8:22 pm
by darthpanda
Image

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 9:37 pm
by Bombhead
Superb job DP ;) Is there to be a GR1/4 he asks hopefully ?

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 9:41 pm
by Blackbuck
I wish to have your babies DP. Especially if we get the whole family.

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 9:56 pm
by darthpanda
Bombhead wrote:Superb job DP ;) Is there to be a GR1/4 he asks hopefully ?
Yes there will be GR version, other wise I can't do the German version.
Blackbuck wrote:I wish to have your babies DP. Especially if we get the whole family.
If you are a girl......perhaps, I do make beautiful baby! my son is gorgeous!
Image

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 27th, 2012, 11:18 pm
by jabba
darthpanda wrote:Sneak Preview
Schweet!

Re: FD scale Aircrafts - Post all your flying objects here

Posted: April 28th, 2012, 6:41 am
by darthpanda
Image