belowdeck parts

[acelanceloet]

I see no need for real difference between the 2, if you look up belowdeck parts you know what the DDG-51 class is.

that said, is that engine purely used as generator, or is there an shaft driver version as well?
well drawn shipright, I will add it the next time I update the first post.

[Shipright]

I am not sure, I have only seen it used as a generator myself. The RR source I linked makes me think it is a dedicated genset.

[erik_t]

As far as I am aware, a direct-drive variant does not exist in the shipboard sense. That doesn't mean that such gensets are not or could not be used as prime movers, but I believe they would need to be in an electric-drive configuration. Ultimately, the system uses the same turbomachinery core as the Allison 501 (and the T56), so for varying values of "variant", certainly there are many thousands of direct-drive systems out there...

[MihoshiK]

Not really a belowdeck part, because it's essentially bolt-on, but I didn't want to start a whole thread for it.
The Rheinmetall MASS decoy launcher.



Which I needed because I'm thinking about redoing HMS Halifax. The old drawing is quite terrible, and after the FELEX upgrade, this is bolted on the ship.

[heuhen]

no side view.

it's the one aft of the 76mm. is the only version of the side-view I have, you might do an better one.
http://shipbucket.com/images.php?dir=Re ... 202003.png

[MihoshiK]

no side view.

it's the one aft of the 76mm. is the only version of the side-view I have, you might do an better one.
http://shipbucket.com/images.php?dir=Re ... 202003.png

The magic word is "Please".

"Can you please draw a side view too?"

Yes Heuhen, I can. Not eveyone is interested in every concievable angle of a part, which is why at first I didn't bother.

[heuhen]

yeah sorry. but thank's. I'll can do an top view later, if you doesn't bother to do that. (it's mainly for Skjold class drawing!)

[acelanceloet]

a second set of eendracht main guns, this time with the turrets such as they were fitted on the Tre Kronor class.
interesting is that the dutch schematics showed much shorter barrels on the drawing.......

[acelanceloet]

a copy of this same file is in the Swedish parts thread as well

[MihoshiK]

The original part for this is almost twice as big as it should be...