Shipbucket

Heuhen, I've checked your numbers off of the drawing, and well, you've bracketed the true values very well. The Turret should be 31 pixels while the turret+Gun should be 63 pixels. The deck level to the top of the sighting domes should be 28 pixels (this means that your large one is one pixel too short).

Please don't get me wrong, I really like the work, and if pressed, will take the large one (I'll shorten the barrel though).

TimothyC wrote:Heuhen, I've checked your numbers off of the drawing, and well, you've bracketed the true values very well. The Turret should be 31 pixels while the turret+Gun should be 63 pixels. The deck level to the top of the sighting domes should be 28 pixels (this means that your large one is one pixel too short).

Please don't get me wrong, I really like the work, and if pressed, will take the large one (I'll shorten the barrel though).

I think i can re-size it a bit! if you don't want to.

re-sized!

Magnificent!

Excellent work fine sir!

well Thank you Sir!

Is there a updated single 40mm Bofors around? Or I just use the one on old drawings.

All right, because I didn't get the USN sheet updated in time, so as mentioned here, here is the new Mk 13/22 GMLS:

Ah, good, deck penetration; this might save us from barmy kitbashing.

Portsmouth Bill wrote:Ah, good, deck penetration; this might save us from barmy kitbashing.

that was 80% of the reason I put it in (and 15% was 'heck, just because I can' )