FD scale vehicle/aircraft request thread

Post all FD scale drawings here.

Moderator: Community Manager

Post Reply
Message
Author
User avatar
odysseus1980
Posts: 3607
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Contact:
Contact odysseus1980

Re: FD scale vehicle/aircraft request thread

#1151 Post by odysseus1980 »

I remember seen De Havilland Sea Vixen here, but it seems resized:

http://www.shipbucket.com/forums/viewto ... en#p128226
Top
trexslee
Posts: 86
Joined: September 12th, 2017, 10:55 pm

Re: FD scale vehicle/aircraft request thread

#1152 Post by trexslee »

I would like to request the 747-X for the never built thread. The 747-X was one of many proposed NLA designs and one of the longest at 86 meters long which is about 1 meter longer than the 747-600X. Check it out here along with 4 other proposed NLA designs: https://www.flightglobal.com/pdfarchive ... search=nla
Top
User avatar
Rhade
Posts: 2804
Joined: July 27th, 2010, 12:45 pm
Location: Poland

Re: FD scale vehicle/aircraft request thread

#1153 Post by Rhade »

Oshkosh LVSR did anyone already made one?

I'm sure that we have some Oshkosh's done but this one?
Image
Nobody expects the Imperial Inquisition!
Top
pegasus206
Posts: 930
Joined: October 17th, 2013, 5:22 pm
Location: Focsani, Romania

Re: FD scale vehicle/aircraft request thread

#1154 Post by pegasus206 »

Oshkosh LVSR did anyone already made one?
Yes is been done on this site you can fiind it

http://shipbucket.com/forums/viewtopic. ... &start=140
___________________________________________

Best Regards,
Aart.

Projects:

The Kingdom of Rochfort in FD
Top
User avatar
Rhade
Posts: 2804
Joined: July 27th, 2010, 12:45 pm
Location: Poland

Re: FD scale vehicle/aircraft request thread

#1155 Post by Rhade »

Thx. I suppose difference between LVSR and M1075 are only in name?
Image
Nobody expects the Imperial Inquisition!
Top
Calis
Posts: 182
Joined: March 29th, 2013, 6:10 pm

Re: FD scale vehicle/aircraft request thread

#1156 Post by Calis »

The LVSR is not been done, the M1075 PLS was done, even though they are related but there are a lot off differences between the two vehicle, one major is where all the air cleaners and exhaust manifold are located.

The LVSR was designed from the ground up for the Marine Corps while the M1075 is used by the Army.
Top
rifleman2
Posts: 601
Joined: February 22nd, 2015, 10:26 am

Re: FD scale vehicle/aircraft request thread

#1157 Post by rifleman2 »

Has the Boxer and AMV 35 been drawn?

looking at various sites vehicle systems are becoming very modular EG Hagglunds E turret or Oto-Melara Hitfirst turret systems has anyone thought of doing a Vehicle systems Parts sheet?
Top
Ro-Po Max
Posts: 961
Joined: May 1st, 2017, 8:35 am
Location: ARCC
Contact:
Contact Ro-Po Max

Re: FD scale vehicle/aircraft request thread

#1158 Post by Ro-Po Max »

rifleman2 wrote: ↑December 2nd, 2018, 4:24 pm Has the Boxer and AMV 35 been drawn?

looking at various sites vehicle systems are becoming very modular EG Hagglunds E turret or Oto-Melara Hitfirst turret systems has anyone thought of doing a Vehicle systems Parts sheet?
Image
More here...http://www.shipbucket.com/forums/viewto ... =27&t=8469. I made a sheet...but :?
Top
User avatar
Rhade
Posts: 2804
Joined: July 27th, 2010, 12:45 pm
Location: Poland

Re: FD scale vehicle/aircraft request thread

#1159 Post by Rhade »

Calis wrote: ↑December 1st, 2018, 9:11 pm The LVSR is not been done, the M1075 PLS was done, even though they are related but there are a lot off differences between the two vehicle, one major is where all the air cleaners and exhaust manifold are located.

The LVSR was designed from the ground up for the Marine Corps while the M1075 is used by the Army.
Do you have some side views for comparing? I mean, what are the visual differences and can M1075 drawing be easy converted in to LVSR?
Image
Nobody expects the Imperial Inquisition!
Top
Calis
Posts: 182
Joined: March 29th, 2013, 6:10 pm

Re: FD scale vehicle/aircraft request thread

#1160 Post by Calis »

Rhade I will find them and PM them to you
Top
Post Reply

Return to “FD Scale Drawings”