Page 12 of 33

Re: Republic of Venezuela

Posted: August 23rd, 2013, 9:54 pm
by eswube
Nice work.

Re: Republic of Venezuela

Posted: August 25th, 2013, 12:00 pm
by KIKE92
The DT-1A Lince is a wheeled tank destroyer designed for light to medium territorial defense and tactical reconnaissance. It was developed by VMI, VHI & CAVIM. VHI was tasked with developing the hull and propulsion systems while VMI & CAVIM were responsible for developing the turrets and weapon systems. The vehicle was developed in response to a Venezuelan Army requirement for a tank destroyer with a firepower superior to that of the old AMX-30V main battle tank but with greater strategic mobility. The main mission of the DT-1A Lince is to protect other lighter elements of the cavalry, using its good power-to-weight ratio, excellent range and cross country ability (despite the wheeled design) and computerized fire control system to accomplish this mission. It was also designed with amphibious capabilitys to match the requirements of the Venezuelan marine corps for an amphibious assault gun.

Image

Re: Republic of Venezuela

Posted: August 27th, 2013, 4:09 pm
by KIKE92
This are other drawings i have updated.

The T-1A Jaguar is an advanced third generation main battle tank, designed and developed by VMI and CAVIM of Venezuela in cooperation with Nexter of France for the Venezuelan Army and export markets. A decision was taken to use the french Leclerc as the basis for the new tank because of its advanced technology and lower weight compared to other NATO tanks.
Image

Image

Image

Re: Republic of Venezuela

Posted: August 27th, 2013, 4:12 pm
by KIKE92
This are the updated equipment sheets.

Image

Image

Re: Republic of Venezuela

Posted: August 28th, 2013, 2:14 pm
by eswube
Nice work.
(Though the ZU-23-2 on equipment sheet is probably somewhat out of scale)

Re: Republic of Venezuela

Posted: August 28th, 2013, 2:29 pm
by KIKE92
Thanks for the comment. And yes the ZU-23-2 is way out of scale i was actually going to remove it form the sheet i jus forgot about it.

Re: Republic of Venezuela

Posted: August 30th, 2013, 1:45 am
by Redhorse
Being a professional artilleryman, I'd swap out your M198s for M777s. Newer metallurgy, self-locating and precision munition capable.

Re: Republic of Venezuela

Posted: September 11th, 2013, 7:04 pm
by KIKE92
Hey everyone this is a ship im trying to make for an AU and is my first attempt at making an old battleship and i need alot of advice
because i have almost no experience drawing this kind of ship.

Image

Re: Republic of Venezuela

Posted: September 11th, 2013, 7:56 pm
by KHT
For being your first battleship, it's a very reasonable design! Something about her feels slightly top-heavy, but that could a design flaw that makes the ship even more believable!

What's the data of it?

Re: Republic of Venezuela

Posted: September 11th, 2013, 8:03 pm
by KIKE92
This are still pretty basic specs:

Type: Battleship
Displacement: 32,000 tons (standard); 38,200 tons (laden)
Length: 215 m
Beam: 31.75 m
Propulsion:
Speed: 25.3 knots (46.9 km/h)
Range: bunkerage: 5,113 tons fuel oil
Complement: 1,370