Page 11 of 51
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 9:17 am
by Hood
Loads od great stuff on these pages.
I like the German E series very much. Nice to seem them in pixels.
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 10:25 am
by Mitchell van Os
darthpanda wrote:T28 super heavy is a bitch to draw.
Kidding me?
She is damm easy.
Compared to the e class from germany
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 10:49 am
by ALVAMA
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 11:46 am
by Mitchell van Os
Very nice made Alex.
I wish i had one in my backyard, must be fun to play with
PSS DP.
american tanks factory.png
As you can see, it aint a hard one.
Check the t-29, i will have more problems with that one
Especially with the T32, because the real lenght has come out 3 times different.
I take the 10.89 meter one, because it comes up with a 90mm barrel if i do it in that lenght.
If i do it like the t30/t29 in 11.55/57 meter, the barrel comes up as 100mm+
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 5:41 pm
by Portsmouth Bill
Caspian Seamonster
I salute this one with the ultimate accolade:
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 5:51 pm
by acelanceloet
actually, it's not the caspian seamonster. the lun was an production prototype, while the casp-A was just an prototype.
alex, you were planning to do casp-A as well, right?
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 5:52 pm
by ALVAMA
acelanceloet wrote:actually, it's not the caspian seamonster. the lun was an production prototype, while the casp-A was just an prototype.
-SNIP-
_SNIP-
Alex, you were planning to do casp-A as well, right?
Thank-you Bill!!!!!
Yeas Caspian Sea Monster is on the list!
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 5:53 pm
by ALVAMA
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 6:20 pm
by Mitchell van Os
We should change the real SB to this scale
Re: FD Scale Vehicles 2
Posted: April 10th, 2011, 7:21 pm
by CanisD
Don't make me hurt you. }:)