Page 2 of 2
Re: Austal MRV 80
Posted: December 14th, 2011, 4:21 pm
by erik_t
Very very interesting. And a nice drawing, too.
Re: Austal MRV 80
Posted: December 14th, 2011, 5:03 pm
by TimothyC
I remember now when you posted a WIP on the old board. It looks good. I may have to steal it for a project or two.
Re: Austal MRV 80
Posted: December 14th, 2011, 5:29 pm
by Portsmouth Bill
This is excellent: good darwing and an interesting concept; and looking at the Austal site I was impressed with what can be packed into this hull
Re: Austal MRV 80
Posted: December 14th, 2011, 9:44 pm
by Philbob
I would possibly redesign the mast, it looks kind of funky but i suspect the renders were not very well thought out in that regard
Re: Austal MRV 80
Posted: December 15th, 2011, 2:09 am
by TimothyC
Oh, for the coast guard one, I've got the following Helos: with colors pulled from a photo I took of a Jayhawk:
Re: Austal MRV 80
Posted: December 15th, 2011, 8:30 am
by TurretHead
Rowdy36 wrote:I've drawn this as it might appear in Australian service, as it often comes up as a possible replacement for the Armidale, Leeuwin, Huon and Paluma Class ships under Project SEA 1180.
This is as good as place as any to mention this but the RAN has changed the shade of grey ships are painted. No longer haze grey but now a green-grey that is designed to blend better in South East Asian waters.
Re: Austal MRV 80
Posted: December 15th, 2011, 2:27 pm
by Rowdy36
Thanks everyone, I've been interested in the potential for this design for a while
@TimothyC - thanks for the helicopters, the one I used was just a rushed repaint of Darth Panda's SH-60 so I shall update it to your drawing immediately
@Turrethead - I thought there was something different about them... I don't suppose you have a sample of the colour used? From browsing some modelling sights the suggested colour was something like this:
Re: Austal MRV 80
Posted: December 15th, 2011, 11:37 pm
by TurretHead
I'm not sure of the exact shade but I could ask around and find out. These pictures of 3D graphics of the AWD seem to show the the greeny tint and a before (haze grey) and after (green grey):
http://www.secretprojects.co.uk/forum/i ... 25376.html
Re: Austal MRV 80
Posted: December 16th, 2011, 5:16 am
by Rowdy36
Ah right, I see. Well I had a go at it: