Page 2 of 6

Re: CoA parts sheet for the fleets of USA

Posted: February 27th, 2012, 4:36 pm
by KimWerner
Two more badges and - funny it's coincidal - again for a carrier and an Arleigh Burke destroyer :D
ImageImage

Re: CoA parts sheet for the fleets of USA

Posted: February 28th, 2012, 1:38 pm
by Zephyr
They have a number of USN ships badges here, about 3/4th of the way down the index page past all the naval aviation links.

One they do not have though is for the USNS Bob Hope T-AKR 300. Anybody got a decent image of it? I can't seem to find one anywhere, if it even has one.

Re: CoA parts sheet for the fleets of USA

Posted: February 28th, 2012, 4:18 pm
by KimWerner
I'm sure there is a badge (or seal as they call it in USN) for USNS Bob Hope T-AKR 300, but I couldn't neither find it in the net :( In fact I found it difficult to find badges for USNS vessels. I think it may have something to do with interest (or lack of it!) because it's easy to find badges for USS and USCGS vessels :geek:

Re: CoA parts sheet for the fleets of USA

Posted: February 28th, 2012, 4:44 pm
by Zephyr
KimWerner wrote:I'm sure there is a badge (or seal as they call it in USN) for USNS Bob Hope T-AKR 300, but I couldn't neither find it in the net :( In fact I found it difficult to find badges for USNS vessels. I think it may have something to do with interest (or lack of it!) because it's easy to find badges for USS and USCGS vessels :geek:
Probably so. That link I have in my previous post has badges galore for combat ships, and naval auxilleries, but not that many for the USNS type ships.

Re: CoA parts sheet for the fleets of USA

Posted: February 28th, 2012, 5:25 pm
by TimothyC
The Midway CoA is a bit wrong (in several places). The lettering should be block - ie no serifs, there should be just one plane - and it should be black, the "41" should be wider, and with a uniform black border, and there should be no black on the edge of the red on the south-east quadrant.

Image

That should help.

Re: CoA parts sheet for the fleets of USA

Posted: February 28th, 2012, 5:33 pm
by KimWerner
TimothyC wrote:The Midway CoA is a bit wrong (in several places). The lettering should be block - ie no serifs, there should be just one plane - and it should be black, the "41" should be wider, and with a uniform black border, and there should be no black on the edge of the red on the south-east quadrant.
That should help.
No. The picture you show here is a big painting where some artistic freedom is used by the artist. I didn't expect any questions so I have deleted the original photo. But when I find the time I shall find it again ;)

[Edit] Here it is:
Image

Re: CoA parts sheet for the fleets of USA

Posted: February 28th, 2012, 7:15 pm
by TimothyC
Oh hell, What about this one:

First image on this page

"Courtesy of CAPT Gene Oleson, CHC, USN (Ret)
(bluejacket.com)"

Re: CoA parts sheet for the fleets of USA

Posted: February 28th, 2012, 8:37 pm
by KimWerner
;) Yeah, there are some different versions - though in nearly same design - around. No one is particurlarly pretty (in my opinion) so I chosed the least ugly :mrgreen:

Re: CoA parts sheet for the fleets of USA

Posted: March 6th, 2012, 3:35 pm
by KimWerner
I've coorperated with Clonecommander6454 with this first seal for an Oliver H. Perry frigate and finally it's done :D
Image

Re: CoA parts sheet for the fleets of USA

Posted: March 7th, 2012, 12:12 am
by Clonecommander6454
KimWerner wrote:I've coorperated with Clonecommander6454 with this first seal for an Oliver H. Perry frigate and finally it's done :D
Image
The color of the CoA somehow feel weird to me... Did you work it out from this image:
http://i.imgur.com/JdwLt.jpg
Anyways, this is way better that the half done product that I have drew ;)