belowdeck parts

Post Shipbucket parts sheets here.

Moderator: Community Manager

Message
Author
ALVAMA

Re: belowdeck parts

#81 Post by ALVAMA »

Our Navy used a Blue missile as a real fire one, I often have seen more blue then white ones aboard.
erik_t
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US

Re: belowdeck parts

#82 Post by erik_t »

odysseus1980 wrote:The horizontal loading variant was faster or at the same level?(4 rounds total per minute,is very low-this means rethinking of my cruisers).
The only arm-launchers of which I'm aware that had a meaningfully higher rate of fire (in any navy) are the USN Mk 11, Mk 13 and Mk 26. I suspect the Soviet SA-N-7 launcher also had a similarly high rate of fire.
User avatar
odysseus1980
Posts: 3607
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Contact:

Re: belowdeck parts

#83 Post by odysseus1980 »

How faster was the diagonal loader Mk10?I have the Mod7 in my cruisers (same with Vittorio Venetto).After NTU upgrade all ships can guide 8 missiles simultaneously (Lysandros) and 10 (Ulysse).Can also "borrow" missiles among them or from Kimon Class with the second ship completely silent.
Rodondo
Posts: 2493
Joined: May 15th, 2011, 5:10 am
Location: NE Tasmania

Re: belowdeck parts

#84 Post by Rodondo »

Ace, I love you! Thank you for the MK11 top view and Front view (it does shame my attempt quite well)
Work list(Current)
Miscellaneous|Victorian Colonial Navy|Murray Riverboats|Colony of Victoria AU|Project Sail-fixing SB's sail shortage
How to mentally pronounce my usernameRow-(as in a boat)Don-(as in the short form of Donald)Dough-(bread)
"Loitering on the High Seas" (Named after the good ship Rodondo)

There's no such thing as "nothing left to draw" If you can down 10 pints and draw, you're doing alright by my standards
User avatar
heuhen
Posts: 9104
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!

Re: belowdeck parts

#85 Post by heuhen »

Rodondo wrote:Ace, I love you! Thank you for the MK11 top view and Front view (it does shame my attempt quite well)

BTW. It was I that made that. 8-) I just PM i to him and he did some small correction. ;)


From time to time (when some one is talking about it) it happens I get my self challenged to do it. :ugeek:
Rodondo
Posts: 2493
Joined: May 15th, 2011, 5:10 am
Location: NE Tasmania

Re: belowdeck parts

#86 Post by Rodondo »

Oh, Heuhen you clever trickster! Thank you so much!
Work list(Current)
Miscellaneous|Victorian Colonial Navy|Murray Riverboats|Colony of Victoria AU|Project Sail-fixing SB's sail shortage
How to mentally pronounce my usernameRow-(as in a boat)Don-(as in the short form of Donald)Dough-(bread)
"Loitering on the High Seas" (Named after the good ship Rodondo)

There's no such thing as "nothing left to draw" If you can down 10 pints and draw, you're doing alright by my standards
User avatar
heuhen
Posts: 9104
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!

Re: belowdeck parts

#87 Post by heuhen »

ace...aemfngksl (I'm drunk again!)


I PM you som shit, watch think ;)
seeker36340
Posts: 617
Joined: June 9th, 2012, 10:21 pm

Re: belowdeck parts

#88 Post by seeker36340 »

The USN uses blues for display, white for conventional and yellow for "clear out as far as you can get" *lol*
User avatar
heuhen
Posts: 9104
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!

Re: belowdeck parts

#89 Post by heuhen »

note on the 30mm I wasent totally shure about what look more corect so I made two version under the twin 30mm, on in the box where it stands SC (sea cobra)

Image
acelanceloet
Posts: 7512
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands

Re: belowdeck parts

#90 Post by acelanceloet »

heuhen, from now on you may just post them in here without pming me before, I manage these parts here but I do not control them. also, I lack time somewhat so I cannot always reply directly, especially not when I am in doubt (as in this case, do these parts need redraws that bad?)
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
Post Reply