Grays Harbor Designs

Post any drawings you have made that do not pertain to an Alternate Universe scenario and are not a never-built design.

Moderator: Community Manager

Message
Author
User avatar
Demon Lord Razgriz
Posts: 446
Joined: July 27th, 2010, 1:18 am
Location: Eastern North Carolina

Kingdom of Grays Harbor Split

#751 Post by Demon Lord Razgriz »

Zephyr wrote:
bezobrazov wrote:No Admiralty??? Just a measly thirteen-in-a-dozen Naval Ministry... :o :( :roll:
We actually use the terms interchangably. The informal title, and most frequently used name, for the Naval Ministry is "The Admiralty". In fact it is more frequently used than the formal name itself, as shown here (8th ministry down the list)


I got a Virus warning from that, so watch out people.
95% of my drawings are destined for NS, 4.9% for fun, & .1% serious.
Worklist:
Space Shuttle
Atlas V
Delta II/III
Project Constellation
Soyuz series
User avatar
Zephyr
Posts: 1587
Joined: November 22nd, 2011, 4:47 am
Location: Marietta, Georgia - USA

Re: Grays Harbor Designs

#752 Post by Zephyr »

And this time a cruiser-minelayer, the Edmund Boyle Class. Laid down in 1924, two of these were commissioned in 1927, the HMS Edmund Boyle and the HMS Albert Stephens. They were designed to be capable both of independent operations and to operate with the fleet.

Image

Edmund Boyle, Grays Harbor cruiser-minelayer laid down 1924 (Engine 1925)

Displacement:
10,065 t light; 10,327 t standard; 11,793 t normal; 12,966 t full load

Dimensions: Length overall / water x beam x draught
502.04 ft / 487.00 ft x 67.00 ft x 23.00 ft (normal load)
153.02 m / 148.44 m x 20.42 m x 7.01 m

Armament:
4 - 6.00" / 152 mm guns in single mounts, 108.00lbs / 48.99kg shells, 1924 Model
Breech loading guns in turrets (on barbettes)
on centreline ends, evenly spread, 2 raised mounts - superfiring
6 - 4.00" / 102 mm guns in single mounts, 32.00lbs / 14.51kg shells, 1924 Model
Breech loading guns in deck mounts
on side, all amidships
8 - 1.57" / 40.0 mm guns in single mounts, 1.95lbs / 0.88kg shells, 1924 Model
Breech loading guns in deck mounts
on side, all amidships, all raised mounts - superfiring
Weight of broadside 576 lbs / 261 kg
Shells per gun, main battery: 75

Armour:
- Belts: Width (max) Length (avg) Height (avg)
Main: 5.00" / 127 mm 287.33 ft / 87.58 m 9.82 ft / 2.99 m
Ends: 4.00" / 102 mm 199.65 ft / 60.85 m 9.82 ft / 2.99 m
Upper: 4.00" / 102 mm 287.33 ft / 87.58 m 8.00 ft / 2.44 m
Main Belt covers 91 % of normal length
Main belt does not fully cover magazines and engineering spaces

- Torpedo Bulkhead:
4.00" / 102 mm 287.33 ft / 87.58 m 21.11 ft / 6.43 m

- Gun armour: Face (max) Other gunhouse (avg) Barbette/hoist (max)
Main: 2.00" / 51 mm - 3.00" / 76 mm

- Armour deck: 2.00" / 51 mm, Conning tower: 2.00" / 51 mm

Machinery:
Oil fired boilers, steam turbines,
Geared drive, 4 shafts, 53,303 shp / 39,764 Kw = 28.00 kts
Range 12,500nm at 14.00 kts
Bunker at max displacement = 2,639 tons

Complement:
565 - 735

Cost:
£2.025 million / $8.098 million

Distribution of weights at normal displacement:
Armament: 72 tons, 0.6 %
Armour: 3,249 tons, 27.5 %
- Belts: 1,313 tons, 11.1 %
- Torpedo bulkhead: 898 tons, 7.6 %
- Armament: 138 tons, 1.2 %
- Armour Deck: 877 tons, 7.4 %
- Conning Tower: 22 tons, 0.2 %
Machinery: 1,731 tons, 14.7 %
Hull, fittings & equipment: 2,214 tons, 18.8 %
Fuel, ammunition & stores: 1,728 tons, 14.7 %
Miscellaneous weights: 2,800 tons, 23.7 %

Overall survivability and seakeeping ability:
Survivability (Non-critical penetrating hits needed to sink ship):
10,886 lbs / 4,938 Kg = 100.8 x 6.0 " / 152 mm shells or 2.6 torpedoes
Stability (Unstable if below 1.00): 1.04
Metacentric height 3.0 ft / 0.9 m
Roll period: 16.3 seconds
Steadiness - As gun platform (Average = 50 %): 74 %
- Recoil effect (Restricted arc if above 1.00): 0.16
Seaboat quality (Average = 1.00): 1.48

Hull form characteristics:
Hull has raised forecastle, rise forward of midbreak, raised quarterdeck
and transom stern
Block coefficient: 0.550
Length to Beam Ratio: 7.27 : 1
'Natural speed' for length: 25.70 kts
Power going to wave formation at top speed: 61 %
Trim (Max stability = 0, Max steadiness = 100): 50
Bow angle (Positive = bow angles forward): 16.20 degrees
Stern overhang: 4.00 ft / 1.22 m
Freeboard (% = measuring location as a percentage of overall length):
- Stem: 38.00 ft / 11.58 m
- Forecastle (18 %): 30.50 ft / 9.30 m (29.50 ft / 8.99 m aft of break)
- Mid (37 %): 29.50 ft / 8.99 m (21.50 ft / 6.55 m aft of break)
- Quarterdeck (23 %): 22.00 ft / 6.71 m (21.50 ft / 6.55 m before break)
- Stern: 22.50 ft / 6.86 m
- Average freeboard: 25.35 ft / 7.73 m

Ship space, strength and comments:
Space - Hull below water (magazines/engines, low = better): 112.1 %
- Above water (accommodation/working, high = better): 192.4 %
Waterplane Area: 23,707 Square feet or 2,202 Square metres
Displacement factor (Displacement / loading): 117 %
Structure weight / hull surface area: 56 lbs/sq ft or 273 Kg/sq metre
Hull strength (Relative):
- Cross-sectional: 0.53
- Longitudinal: 1.61
- Overall: 0.60
Caution: Hull subject to strain in open-sea
Hull space for machinery, storage, compartmentation is cramped
Room for accommodation and workspaces is excellent
Ship has slow, easy roll, a good, steady gun platform
Good seaboat, rides out heavy weather easily


The armor belt was just kind-of a guesstimate as I did the SS prior to actually adding the belt. I figured since it is a cruiser-minelayer, and supposed to operate in forward combat zones, some armor along the lines of what a standard cruiser may have would not be out of line. I am also guessing that mine capacity would be somewhere around 600-800. I added 1600 misc. tons for that, and 800 tons for the catapult and aircraft facilities. There is only one catapult, and no hanger, the floatplane being covered with a tarpaulin when not in use. The 6"/45 main guns are in single turrets of the "weatherproof" type, so armor is minimal on them. The Boyles were the last ships built using that type turret. (I was thinking of having them replaced with twin 4.7"/45 twin mounts in the late 30's)
Last edited by Zephyr on June 6th, 2012, 5:05 am, edited 3 times in total.
"Anybody remotely interesting is mad in some way." - The Seventh Doctor
User avatar
Zephyr
Posts: 1587
Joined: November 22nd, 2011, 4:47 am
Location: Marietta, Georgia - USA

Re: Kingdom of Grays Harbor

#753 Post by Zephyr »

virus warning? really? thats odd. I've had that site since about 2003. I know it needs updating, but I didn't know about any virus.
"Anybody remotely interesting is mad in some way." - The Seventh Doctor
User avatar
Dilandu
Posts: 381
Joined: October 8th, 2011, 11:26 am
Location: Russian Federation

Re: Grays Harbor Designs

#754 Post by Dilandu »

Cool!
Serve the Nation! Be striped!
User avatar
Trojan
Posts: 1216
Joined: March 26th, 2012, 4:29 am
Location: Big House

Re: Grays Harbor Designs

#755 Post by Trojan »

Excellant class I think I personally prefer my cruisers a bit more "sleek" but none the less its a very nice design
slightly off topic question any plans on doing the IIRC HMS Diomede with the Mk.XVl i see u made
Projects:
Zealandia AU
John Company AU
References and feedback is always welcome!
User avatar
ezgo394
Posts: 1332
Joined: July 27th, 2010, 2:39 am
Location: Cappach, Salide

Re: Kingdom of Grays Harbor

#756 Post by ezgo394 »

I checked it out earlier and I didn't get a virus warning.
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.
User avatar
Zephyr
Posts: 1587
Joined: November 22nd, 2011, 4:47 am
Location: Marietta, Georgia - USA

Re: Grays Harbor Designs

#757 Post by Zephyr »

Trojan wrote:Excellant class I think I personally prefer my cruisers a bit more "sleek" but none the less its a very nice design
slightly off topic question any plans on doing the IIRC HMS Diomede with the Mk.XVl i see u made
Heres a "clean" version without railings and such if you want to use it. :)

Image


As far as my cruisers go, my navy has always preferred more robust than sleek, particularly during the 1910-1940 period. My modern cruisers are a bit sleeker though, as is my Colonies class light cruiser series.
"Anybody remotely interesting is mad in some way." - The Seventh Doctor
User avatar
Trojan
Posts: 1216
Joined: March 26th, 2012, 4:29 am
Location: Big House

Re: Grays Harbor Designs

#758 Post by Trojan »

Thank you very much however I don't think my kit bashing drawing skills would do any good for the ship
and reasonable enough and yes good point there
Projects:
Zealandia AU
John Company AU
References and feedback is always welcome!
eltf177
Posts: 503
Joined: July 29th, 2010, 5:03 pm

Re: Grays Harbor Designs

#759 Post by eltf177 »

I like it, but isn't 75 rpg a bit low for the Main Battery?
User avatar
Thiel
Posts: 5376
Joined: July 27th, 2010, 3:02 am
Location: Aalborg, Denmark

Re: Grays Harbor Designs

#760 Post by Thiel »

If the SS report is accurate then the design has some problem. Also, the 40mm guns should be machineguns and while the SS report says it has a transom stern, the drawing doesn't.
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.
Post Reply