CdS - Corvette de Surveillance
Moderator: Community Manager
CdS - Corvette de Surveillance
Based off an older, less viable design*, this is a multi-mission corvette.
Weapons Suite:
[8] Kongsberg NSM
[32] Raytheon ESSM
[1] Bofors 57mm
[1] Bofors 40mm
Electronics Suite:
CEAFAR RADAR
ARTEMIS IRST
*http://shipbucket.com/forums/viewtopic.php?f=15&t=10562
Last edited by HanD on August 1st, 2023, 11:13 pm, edited 1 time in total.
Re: CdS - Corvette de Surveillance
Interesting. I’ve been playing around with a similar concept… an ocean-going patrol corvette.
Mine is around 102m long and 2,200 tons, derived from the Gowind 200 concept in the mid 2000s.
Might be worth comparing the layout and especially the internals… I think yours looks a little small for all the equipment you want to fit. You could also compare to a K130.
Mine is around 102m long and 2,200 tons, derived from the Gowind 200 concept in the mid 2000s.
Might be worth comparing the layout and especially the internals… I think yours looks a little small for all the equipment you want to fit. You could also compare to a K130.
Last edited by H_K on August 23rd, 2023, 3:41 pm, edited 1 time in total.
-
- Posts: 94
- Joined: March 9th, 2020, 8:21 pm
Re: CdS - Corvette de Surveillance
Hello H_K, but given that I am the original artist of "your" corvette, my username should be credited first and then your usernameH_K wrote: ↑July 21st, 2023, 9:32 pm Interesting. I’ve been playing around with a similar concept… an ocean-going patrol corvette.
Mine is around 102m long and 2,200 tons, derived from the Gowind 200 concept in the mid 2000s.
Might be worth comparing the layout and especially the internals… I think yours looks a little small for all the equipment you want to fit. You could also compare to a K130.
Worklist:
- Solkriet - My Personal AU: http://www.shipbucket.com/forums/viewto ... 14&t=10834
- America the Divided - Joint-Project between Minepagen and I http://www.shipbucket.com/forums/viewto ... =14&t=9855
- Occasionally the Random pop-ups of my Abyssinia or Hong Kong AUs
"The word Br*t?sh is a horrible term I never want to hear from you again, We do not tolerate that dehumanization".
- Solkriet - My Personal AU: http://www.shipbucket.com/forums/viewto ... 14&t=10834
- America the Divided - Joint-Project between Minepagen and I http://www.shipbucket.com/forums/viewto ... =14&t=9855
- Occasionally the Random pop-ups of my Abyssinia or Hong Kong AUs
"The word Br*t?sh is a horrible term I never want to hear from you again, We do not tolerate that dehumanization".
Re: CdS - Corvette de Surveillance
Ok fixed it. (Sorry I had misunderstood in what order to credit drawings)Ultraking101 wrote: ↑July 30th, 2023, 10:39 pm Hello H_K, but given that I am the original artist of "your" corvette, my username should be credited first and then your username
As a bonus here’s a side-by-side comparison of my design versus your original art and versus the Gowind 200 (which I believe you used as your baseline).
My changes to yours were the inverted bow, enlarged integrated mast, and some more minor details (weapons & sensors). I think your main changes to the Gowind 200 were ditching the waterjet propulsion (very sensible) and removing the bow sonar?
-
- Posts: 7512
- Joined: July 28th, 2010, 12:25 pm
- Location: the netherlands
Re: CdS - Corvette de Surveillance
It also looks like ultrakings design uses an completely different internal arrangement, with midship machinery, if I see the uptake and intake arrangement.
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin