I was looking at the image for the Savannah and noticed that it was too deep in the hull compared to her length, so using her booklet of plans that is posted online, I redid the artwork.
Please feel free to give feedback and suggestions for improvement.
NS Savannah
Moderator: Community Manager
-
- Posts: 3908
- Joined: November 17th, 2010, 8:03 am
- Location: Corinth, MS USA
- Contact:
Re: NS Savannah
Very nice work!
-
- Posts: 7511
- Joined: July 28th, 2010, 12:25 pm
- Location: the netherlands
Re: NS Savannah
Quite nice, although I cannot quite follow the way you shaded her.....
The ship also seems to be not in the right spot on the template
The ship also seems to be not in the right spot on the template
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
Re: NS Savannah
I'm not quite sure what you're referring to here. I used the sheer plan for the hull for the shading...acelanceloet wrote: ↑March 7th, 2021, 6:39 pm Quite nice, although I cannot quite follow the way you shaded her.....
The contrast for the white shading doesn't really pop, but is subtle.
Yep, was about four pixels low. Here is that corrected.The ship also seems to be not in the right spot on the template
- heuhen
- Posts: 9104
- Joined: December 15th, 2010, 10:13 pm
- Location: Behind you, looking at you with my mustache!
Re: NS Savannah
With shading, see shipbucket style guide on the main page. But generally we do not use light shade underwater and we draw as the light come frome above-front and not directly from the front.
See also how we other shad shiphull
See also how we other shad shiphull
Re: NS Savannah
I think I see what you did. It looks like you took and shaded everything but the hull that was about four feet from the maximum width - which is a close match to the shading on the original drawing.
From what I remember, the hull shape on NS Savannah is broadly similar to the hull shape on American Racer
What I did here was I followed the idea that everything that is more vertical than horizontal is not shaded while areas that are more horizontal than vertical, are shaded (ie the delineation is made at 45°; a combination of 30° and 60° is also used in some drawings). I can try and hack out some of what I think the shading curves would be if you'd like.
As for placement, again I'd direct you to the above drawing of American Racer, and remember that on the full height templates the ship's waterline, not keel is on the marked line. If the ship's draft would result in the hull being cut off, the template can be extended down to account for this.
𝐌𝐀𝐓𝐇𝐍𝐄𝐓- 𝑻𝒐 𝑪𝒐𝒈𝒊𝒕𝒂𝒕𝒆 𝒂𝒏𝒅 𝒕𝒐 𝑺𝒐𝒍𝒗𝒆