Republic of China (Taiwan) Perry-class Modifications

Post any drawings of planned or conceptual ships.

Moderator: Community Manager

Message
Author
Navybrat85
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact:

Re: Republic of China (Taiwan) Perry-class Modifications

#11 Post by Navybrat85 »

One more update, Ace reminded me about the bow-mounted sonar.

Image

Image
World's Best Okayest Author and Artist
acelanceloet
Posts: 7511
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands

Re: Republic of China (Taiwan) Perry-class Modifications

#12 Post by acelanceloet »

I am actually not certain these ships would carry 2 helicopters, seeing the hangar is not full beam anymore. The aft SPG-62 would have to be placed somewhat higher, to clear the hangar spaces, I think
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
Navybrat85
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact:

Re: Republic of China (Taiwan) Perry-class Modifications

#13 Post by Navybrat85 »

Two might be a tight fit...the hangar is probably not more than 30 feet wide on the inside...
World's Best Okayest Author and Artist
JSB
Posts: 1433
Joined: January 21st, 2014, 5:33 pm

Re: Republic of China (Taiwan) Perry-class Modifications

#14 Post by JSB »

On the subject of a tight fit, how does this all fit on the hull? Has the hull been stretched or did it have large margins already?

Swap
- 3", Phalanx, Mk13
for
- 5", RAM, MK41 and 8x harpoon

Fit two bigger helicopters (note FFG7 did not carry 2 SH2 and you have 2 SH60?)

I don't see much savings on radar as well?

But anyway they do look nice, especially the later one.
Navybrat85
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact:

Re: Republic of China (Taiwan) Perry-class Modifications

#15 Post by Navybrat85 »

About the only thing left from the original design is the engines and hull shape. the angle of the deck changes, bringing up her freeboard, the missiles are moved back slightly and the VLS is elevated to give room; the ASMs are in the general area where the 3" was, and the 5" is closer to the original spot of the Mk. 13.

They seriously reconfigured her for this concept.
World's Best Okayest Author and Artist
Navybrat85
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact:

Re: Republic of China (Taiwan) Perry-class Modifications

#16 Post by Navybrat85 »

I should also mention, as was discussed in the Discord this morning, this ship is almost certainly a new build concept. there's so much structural work being done that rebuilding an existing ship to this standard, while in theory probably doable, is not worth the expense and effort.
World's Best Okayest Author and Artist
User avatar
heuhen
Posts: 9104
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!

Re: Republic of China (Taiwan) Perry-class Modifications

#17 Post by heuhen »

they would propably do as much changes to the hull as the Norwegians did to Oslo class that was based on a Dealey class. where they gave it a more flater underwater hull, and flater stern and a bigger bow/above water hull, than original
Miklania
Posts: 84
Joined: February 11th, 2017, 12:45 am

Re: Republic of China (Taiwan) Perry-class Modifications

#18 Post by Miklania »

It also appears that the stacks are too far aft. In the reference image, they are forward of the boat handling area and that sort of "waist" in the super structure. Right now they might be infringing on the hangar space somewhat.
Drawings signed both (Miklania) and (M.Morris)
TimothyC
Posts: 3765
Joined: July 27th, 2010, 3:06 am
Contact:

Re: Republic of China (Taiwan) Perry-class Modifications

#19 Post by TimothyC »

I know I'm casting a necromancy spell, but I remembered/found where I had seen something about one of the possible OHP derived designs:

Image
πŒπ€π“π‡ππ„π“- 𝑻𝒐 π‘ͺπ’π’ˆπ’Šπ’•π’‚π’•π’† 𝒂𝒏𝒅 𝒕𝒐 𝑺𝒐𝒍𝒗𝒆
erik_t
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US

Re: Republic of China (Taiwan) Perry-class Modifications

#20 Post by erik_t »

There's a lot to unpack here. 32 cells forward, but trading an entire helo hangar for four cells aft? Text says the central superstructure block is one deck lower, but the drawing shows two (not to mention the mast being totally different)? Completely new forward superstructure plus rearrangement of spaces below it? Two screws, not one?

Hard to read this as an "updated, enlarged" Perry derivative. The ADB drawing lends credence, but...
Post Reply