Federal Republic of Denton

Post drawings from any Alternate Universe scenario here.

Moderator: Community Manager

Message
Author
User avatar
swin_lad
Posts: 312
Joined: December 10th, 2010, 2:05 pm
Location: Swindon Town FC, From the West Country

Re: Federal Republic of Denton

#281 Post by swin_lad »

That plain may be a bitch to control if you lose an engine with all that power!
Krakatoa
Posts: 2504
Joined: July 1st, 2014, 12:20 am
Location: New Zealand
Contact:

Re: Federal Republic of Denton

#282 Post by Krakatoa »

Just as a visual identifier. Everybody is familiar with a B-29 and how huge those were.

Just to show how big Dentons new bomber is, (B-36 equivalent) the photo below is one of those "picture speaks a 1000 words".

Image

The above is an original from 1948. No extra Jet packs yet.
apdsmith
Posts: 855
Joined: August 29th, 2013, 5:58 pm
Location: Manchester, UK

Re: Federal Republic of Denton

#283 Post by apdsmith »

Heh, here's another photo to provide some sort of scale. It's a B-36 mod, the NB-36H (yes, "N" as in "Nuclear")

Image

The little plane in the background is a B-50, all 99 foot of it...
Public Service Announcement: This is the preferred SB / FD font.
Image
NSWE: viewtopic.php?f=14&t=5695
User avatar
ezgo394
Posts: 1332
Joined: July 27th, 2010, 2:39 am
Location: Cappach, Salide

Re: Federal Republic of Denton

#284 Post by ezgo394 »

@swin_lad - Nah. Shouldn't be too bad. It'll be like flying the B-36, which a pilot once said "it's like sitting on your front porch and flying your house around." Plus, one engine out of ten?

@Krakatoa, Apdsmith, Yep! The blasted thing is huge! It has a larger wingspan than that of the 747-8i (doesn't beat the A380, but we all know that Airbus is crap anyways). The B36 is what made me want to have a large bomber, and the NB-36H is what inspired me to draw one, so I started looking and found the Model 462 to work off of. In fact, the nose on the Condor is heavily based on the nose of the NB-36H. If you look, closely, you should be able to see it ;) .
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.
User avatar
heuhen
Posts: 9104
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!

Re: Federal Republic of Denton

#285 Post by heuhen »

careful boy, I would go out and say the A380 is crap, specially in a forum full of Europeans!

Fun fact. There was an A380 that had an incident, where on of it's engine exploded, cutting all power-line and communication line in one of the wing. causing a error message so long that you could go trough them for hours... still managed to fly and land with one functional wing, two of the starbord engine that was responding on cockpit command and the port engine stuck at full throttle that they had no control o, it took fire crew a 2 hour at ground hosing it down with water before they managed to stop that engine.
User avatar
ezgo394
Posts: 1332
Joined: July 27th, 2010, 2:39 am
Location: Cappach, Salide

Re: Federal Republic of Denton

#286 Post by ezgo394 »

:D Well to be honest, while I prefer Boeing over Airbus, Boeing sucks too. The reason I don't like either of them is that essentially they have a duopoly on the airliner market. That's not cool. I miss the good ol' days where there were more choices and you didn't have to choose between two large multinational global enterprises. But really, that's just my opinion. I'm against globalisation anyways, so don't listen to me ;)
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.
User avatar
heuhen
Posts: 9104
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!

Re: Federal Republic of Denton

#287 Post by heuhen »

well it come down to that it's so unbelievable expensive to develop a new aircraft now. So either you have to be a company so big that you can afford to developed everything from ground up, or you must have meet the most retarded banker.

But it is possible for a small company to produce something, but if they shall have any type of chance to survive, they must make a deal with one of the bigger company, so they can use same parts as them. For in the end, if a part fails, it is the producer of that part, that have to pay for the damage... and that can cost a lot.
User avatar
zagoreni010
Posts: 51
Joined: March 15th, 2016, 10:01 pm
Location: Croatia

Re: Federal Republic of Denton

#288 Post by zagoreni010 »

Krakatoa wrote:Just as a visual identifier. Everybody is familiar with a B-29 and how huge those were.

Just to show how big Dentons new bomber is, (B-36 equivalent) the photo below is one of those "picture speaks a 1000 words".

Image

The above is an original from 1948. No extra Jet packs yet.
How cute, momie duck and little duckling, ups, what the hell did i just say, i apologize i am not soft like th is :oops:
“You are fighter pilots first, last, always. If I ever hear of any of you shooting at someone in a parachute, I'll shoot you myself." Gustav Rödel
User avatar
ezgo394
Posts: 1332
Joined: July 27th, 2010, 2:39 am
Location: Cappach, Salide

Re: Federal Republic of Denton

#289 Post by ezgo394 »

Been away for some while, but still lurking and communicating with some members. It's been so long since I've finished a drawing, I decided to do just that. I've got several drawings in various stages, and this one was the most complete, so after a couple of hours of adding the final details and trying to remember all the specs I had conjured up, here it is.
I had used Rowdy36's Munglinup Frigate as inspiration (which reminds me, Rowdy, did you get rid of it? I can't find it in your thread), and did my usual thing. Some may notice the use of multiple angles throughout the ship, which I did as an experiment but I quickly liked it. If you look closely, you should be able to see that every angle complements another on the ship. I drew up most of my own systems, missiles, and electronics, but don't ask me about the technical aspects because I don't know. I'm horrible with the electronics, and really just had to guess at it. I was doing pretty good when I first started this ship, but 4 months have passed since then. Anyways, here she is.

Image
MacGowan Class Guided Missile Frigates - 16 ships in class
First Commisioned in 2005

Length: 483ft
Beam: 61ft
Draught: 17ft (hull)
Displacement: 7,200tons
Speed: 30kts
Range: 7000nm at 18kts
Complement: 180
Aircraft Carried: 2x Ranger Helicopters

Armament:
1x 5"/54 Dual Purpose Gun
1x 64 cell VLS
8x Anti-Ship Missiles
2x Champion 4x 37mm Rotary Cannon CIWS
2x Triple Torpedo Tubes

Electronics:
Ārai AESA Long Range Air Search

It has been a while since I've drawn a ship, so if I've missed anything, please let me know.

-Ethan
Last edited by ezgo394 on July 18th, 2016, 9:01 pm, edited 1 time in total.
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.
User avatar
ezgo394
Posts: 1332
Joined: July 27th, 2010, 2:39 am
Location: Cappach, Salide

Re: Federal Republic of Denton

#290 Post by ezgo394 »

Double post, apologies.

I'm working on the FACs for the DN and I'm trying to figure out what I should do for the armaments. I'm basing the hull off of the Sa'ar 4.5 and was considering having 2x 3" compacts on the bow and stern, 2x4 AShM launchers amidships, behind the superstructure (just like the Sa'ar 4.5) and then adding a Champion CIWS (equipped with anti-missile SAM) on an elevated structure just aft of the AShM (replacing where the Gabriel AShM would be). Does this sound like a reasonable arrangement?

-Ethan
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.
Post Reply