William Beardmore 1912 CV

Post any drawings of planned or conceptual ships.

Moderator: Community Manager

Message
Author
JSB
Posts: 1433
Joined: January 21st, 2014, 5:33 pm

Re: William Beardmore 1912 CV

#11 Post by JSB »

Yes I think we are talking at cross purposes, that is the gun I got off the part sheet, my question was more, A) is it right B) has anybody done any of the Cls mentioned.
Novice
Posts: 4126
Joined: July 27th, 2010, 5:25 am
Location: Vrijstaat

Re: William Beardmore 1912 CV

#12 Post by Novice »

Interesting design, to say the least.
BTW the link ti Flight Global, talks about the design of what became HMS Argus, a totaly different design.
Image Thank you Kim for the crest

"Never fear to try on something new. Remember that the Titanic was built by professionals, and the Ark by an amateur"
JSB
Posts: 1433
Joined: January 21st, 2014, 5:33 pm

Re: William Beardmore 1912 CV

#13 Post by JSB »

Novice wrote:Interesting design, to say the least.
BTW the link ti Flight Global, talks about the design of what became HMS Argus, a totaly different design.
I interpreted it as a continued design process just with a different hull substituted (from a spare civilian ship) as Argus started out as a design with twin bridges on each side like this design (but was changed during the building) hope that makes sense ?
Novice
Posts: 4126
Joined: July 27th, 2010, 5:25 am
Location: Vrijstaat

Re: William Beardmore 1912 CV

#14 Post by Novice »

JSB wrote: I interpreted it as a continued design process just with a different hull substituted (from a spare civilian ship) as Argus started out as a design with twin bridges on each side like this design (but was changed during the building) hope that makes sense ?
The HMS Argus was converted from an Italian liner, and the conversion design was made by the same designer of the 1912 CV design.
Image Thank you Kim for the crest

"Never fear to try on something new. Remember that the Titanic was built by professionals, and the Ark by an amateur"
JSB
Posts: 1433
Joined: January 21st, 2014, 5:33 pm

Re: William Beardmore 1912 CV

#15 Post by JSB »

Novice wrote:
JSB wrote: I interpreted it as a continued design process just with a different hull substituted (from a spare civilian ship) as Argus started out as a design with twin bridges on each side like this design (but was changed during the building) hope that makes sense ?
The HMS Argus was converted from an Italian liner, and the conversion design was made by the same designer of the 1912 CV design.
Yes, but doesn't the flight article suggest that Argus was (started) as a conversion using this 1912 design but on an available hull (the Italian liner) ?

So you get the sequence as follows,
1) Beardmore suggests 1912 design,
2) RN says no (probably due to cost ?)
3) War starts (RN finds sea planes hard to operate at sea)
4) RN asks for a CV (it now has plenty of war time budget)
5) Beardmore modifies design to fit a hull it has available (Italian Liner stopped at start of war as time is short)
6) during building changes to reflect experience (ie do not fit twin island if you want to be able to land on it)
7 ) HMS Argus commissioned

(does that make sense, please tell me if you think I'm wrong ?)

PS does anybody have any 1914 float planes that I could borrow for this ?
User avatar
Thiel
Posts: 5376
Joined: July 27th, 2010, 3:02 am
Location: Aalborg, Denmark

Re: William Beardmore 1912 CV

#16 Post by Thiel »

Are you sure the forward deck was intended as a flying off deck? It's low enough that any swell at all will make any flight awfully short and I can't help but notice that there's something that looks like a bulwark between it and the elevator.
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.
JSB
Posts: 1433
Joined: January 21st, 2014, 5:33 pm

Re: William Beardmore 1912 CV

#17 Post by JSB »

Thiel wrote:Are you sure the forward deck was intended as a flying off deck? It's low enough that any swell at all will make any flight awfully short and I can't help but notice that there's something that looks like a bulwark between it and the elevator.
The text I have says it was interned for taking off (float planes on trolleys), the low free board doesn't really matter (as much) as I think this is more base ship rather than for work with a fleet at sea and the bulwark is (I think, I'm now having second thought about it wish I had better sources ?) a canvas screen to keep the wind off aircraft in the centre ally, but it is a bulwark it should be ok to mov planes over it with a crane and then take off. (rememberer the short take off decks on turrets for WW1 planes)

Updated the WIP on page 1
Novice
Posts: 4126
Joined: July 27th, 2010, 5:25 am
Location: Vrijstaat

Re: William Beardmore 1912 CV

#18 Post by Novice »

I think your time line is correct JSB.
As for aircraft you can find the HMS Engadine in the archive and HMS Ark Royal of 1914.
Image Thank you Kim for the crest

"Never fear to try on something new. Remember that the Titanic was built by professionals, and the Ark by an amateur"
JSB
Posts: 1433
Joined: January 21st, 2014, 5:33 pm

Re: William Beardmore 1912 CV

#19 Post by JSB »

Image

What do you think ?

might add planking to deck and should I add the top masts to the top view ? (and would love the underwater hull but would just be guessing)
Krakatoa
Posts: 2504
Joined: July 1st, 2014, 12:20 am
Location: New Zealand
Contact:

Re: William Beardmore 1912 CV

#20 Post by Krakatoa »

Looks good JSB, planking would certainly improve those wide open spaces.

A ship with that length to breadth ratio would normally be shallow draught, if that's any help. Monitor type hull?
Post Reply