cvbbdds world
Moderator: Community Manager
Re: cvbbdds world
Mate, the Vernon Baker is missing a lot of detail. Your fonts are all wrong and not in-line with SB standards. But, the enthusiasm is there...
There is no "I" in TEAM but there is a ME
______________________
Current Worklist:
Redrawing my entire AU after a long absence from Shipbucket
______________________
Current Worklist:
Redrawing my entire AU after a long absence from Shipbucket
Re: cvbbdds world
my mod of I-400 into the I-460. hanger replaced with magazine for 1 x16in gun
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
- USS Kearsarge crane ship No. 1(on hold) need pics
top down weapon and plane sheets
-
- Posts: 7512
- Joined: July 28th, 2010, 12:25 pm
- Location: the netherlands
Re: cvbbdds world
forget the magazine. the hangar will be only large enough for the gun itself (if it even fits) the gun can only aim a few degrees up.
that said, you don't have to worry about the magazine because your sub might go to pieces altogether at the first shot: I have doubts about the superstructure supporting the weight and recoil blast.
(your main problem, where all the above come from, is that the gun is waaaay too big)
that said, you don't have to worry about the magazine because your sub might go to pieces altogether at the first shot: I have doubts about the superstructure supporting the weight and recoil blast.
(your main problem, where all the above come from, is that the gun is waaaay too big)
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
-
- Posts: 3908
- Joined: November 17th, 2010, 8:03 am
- Location: Corinth, MS USA
- Contact:
Re: cvbbdds world
That and it'll probably destroy the now-superfluous launch ramp. I attempted something similar (with a twin 14-inch turret) in a long-forgotten AU once, but I also enlarged the sub greatly to compensate.acelanceloet wrote:forget the magazine. the hangar will be only large enough for the gun itself (if it even fits) the gun can only aim a few degrees up.
that said, you don't have to worry about the magazine because your sub might go to pieces altogether at the first shot: I have doubts about the superstructure supporting the weight and recoil blast.
(your main problem, where all the above come from, is that the gun is waaaay too big)
Re: cvbbdds world
this is a rough drawing of USS la crosse it will eventually have 32x 5in guns in dual and quad turrets
take a look and comment
take a look and comment
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
- USS Kearsarge crane ship No. 1(on hold) need pics
top down weapon and plane sheets
Re: cvbbdds world
What exactly is that submarine for, what do you need 32 5" guns for?
Re: cvbbdds world
Well...
Regarding the AA cruiser, very doubtfully. I don't think that hull(which is very blocky, making high speeds impossible) can carry that amount of guns.
Also, quad turrets are infamous for being overly complex and prone to breakdown, often hampered by jaming and slow rate of fire(the general rule is: the more guns you fit in a turret, the slower will each individual gun fire). They will also be very heavy, making training and elevation too slow to serve effectively.
There are reasons why the most succesfull DP mounts of that era was in twin mounts: it was simply the most balanced alternative.
I would also suggest you read this thread, especially the comments from Klags.
And lastly, and this goes for all ships you've made so far: Just becouse it looks like it can fit(on the surface), doesn't mean it will. You will have to take bellow-deck structure into account as well. Please, visit this thread for more notes on this.
Regarding the AA cruiser, very doubtfully. I don't think that hull(which is very blocky, making high speeds impossible) can carry that amount of guns.
Also, quad turrets are infamous for being overly complex and prone to breakdown, often hampered by jaming and slow rate of fire(the general rule is: the more guns you fit in a turret, the slower will each individual gun fire). They will also be very heavy, making training and elevation too slow to serve effectively.
There are reasons why the most succesfull DP mounts of that era was in twin mounts: it was simply the most balanced alternative.
I would also suggest you read this thread, especially the comments from Klags.
And lastly, and this goes for all ships you've made so far: Just becouse it looks like it can fit(on the surface), doesn't mean it will. You will have to take bellow-deck structure into account as well. Please, visit this thread for more notes on this.
Re: cvbbdds world
A number of the 5" turrets literally do not have the space to train onto the beams. Minor side detail, I guess...
Re: cvbbdds world
it would be more like a AA battleship than a cruiser, i was trying to take double the with of atlanta class and made it 750 ft long or so
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
- USS Kearsarge crane ship No. 1(on hold) need pics
top down weapon and plane sheets
Re: cvbbdds world
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:
- USS Kearsarge crane ship No. 1(on hold) need pics
top down weapon and plane sheets